Alpha Shield Hardware Firewall Spezifikationen PDF herunterladen (Seite 6)

Revision 1.4

Follow the simple steps below to install your new AlphaShield™ to

your home computer. If any of the steps do not indicate the proper list-

ed expectations, please refer to the troubleshooting guide contained in

this manual.

(1) Remove the AlphaShield™ from the shipment box and

insure the following is accounted for.

One AlphaShield™ security device.

One 9 Volt DC, 300 mA Universal Power Adapter.

One RJ-45 6 foot straight through network cable.

One Installation and User’s guide.

(2) Power up the AlphaShield™ with the universal A.C. adapter.

Plug the circular plug from the power adapter into the power jack

on the AlphaShield™.

Plug the Universal 9 volt DC adapter into a standard wall socket.

Observe and make sure that the center connect LED on the front of

the AlphaShield™ illuminates red.

(3) Connect the AlphaShield™ to the external Cable or xDSL modem

Use a straight RJ-45 cable to connect your cable or xDSL modem to

the input RJ-45 of the AlphaShield™.

If connected properly with a good cable, the Inbound Data LED

indicator should illuminate green.

Installation and Operation

Getting

Started

6 Powered By AlphaShield

version 1.5.qxd 06/05/2003 15:55 Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Keine Kommentare

Alpha Shield Hardware Firewall Spezifikationen Seite 6